IC Matching information (Toshiba Corporation Semiconductor & Storage Products Company)
CMOS area image sensor TCM3212GBA
[ IC Information ] Click Here
| TCM3212GBA | |
|---|---|
| FSI/BSI | FSI |
| Optical size | 1/4inch |
| Pixel pitch | 5.6µm |
| Number of pixels | 0.3M(VGA)pixel |
| Output pixels | YUV/RGB 640(H)×480(V) pixel |
| NTSC 648(H)×486(V) pixel | |
| Data formats | RAW10 bits |
| RAW12bits | |
| YUV422 | |
| RGB565 | |
| RGB888 | |
| Frame rate (full) | 60fps |
| Frame rate (VGA) | 60fps |
| Power supply voltage (analog) | 3.3 +/- 0.3V |
| Power supply voltage (digital) | 3.3 +/- 0.3V |
| Power supply voltage (IO) | 3.3 +/- 0.3V or 1.8 +/- 0.1 V |
| Operating temperature (Topr) | -40 to 105degC |
| Storage temperature (Tstg) | -40 to 125degC |
| Type | Package |
| Package type | CSP |
| Package size | 6.78×6.33mm |
Details of Matching Test
Test IC : TCM3212GBA
1.CIRCUIT DIAGRAM
| IC Name | TCM3212GBA |
| VDD | +3.3V |
2. Circuit characteristics for recommended circuit parameters. ( Rd=1kΩ, Cin=12pF, Cout=12pF )
| VDD(V) | Frequency Deviation dF/F(×10-6) |
Negative Resistance -R(Ω) |
Drive Level DL(uW) |
|---|---|---|---|
| +3.3 | -2 | 1100 | 200 |
NDK Crystal
Model : NX2016SA Frequency : 24.9231MHz Load capacitance : CL=8pF
Please use below Ordering Code for specifying this crystal.
| Ordering Code | CHP-CZS-9 |
Note
- Negative Resistance
The recommended oscillation margin based on empirical results which is necessary to ensure the crystal's ability to start and maintain
stable oscillation. - Drive Level
Electric-power or current level under the specified conditions of a crystal unit.
If the specified maximum drive level of the crystal is exceeded, this may result in the occurrence of unstable oscillation and increase of
equivalent series resistance. - Load capacitance
Effective series capacitance measured from the terminals of a crystal unit to the oscillation circuit and determined
as a condition when using a crystal unit in an oscillation circuit.
The operating frequency is determined by the electrical characteristics of a crystal unit and the load capacitance.
Caution
The evaluation results above should be used as a reference during the crystal selection. Depending on the actual board layout, frequency used, and other related factors the circuit characteristics may differ, therefore selection of the crystal should be done based on evaluation results of the actual circuit board.
Please contact us for recommendations of crystal specifications which will work best for your applications.
For additional enquiries, please send email : 
For disclaimer information, please refer here.
*https://www.ndk.com/en/1172916_914.html
Copyright© 1997- NIHON DEMPA KOGYO CO., LTD.